How to Reset Vizio Sound Bar (2023)

FAQs

How do I factory reset my Vizio sound bar? ›

Press and Hold the Input and Bluetooth buttons for 10 seconds. All of the LEDs will flash four times. If the LEDs only flash once, repeat the steps above to disable the Demo Mode.

Unplug the power cord from the Sound Bar. Once unplugged, hold down the power button on the Sound Bar for 5 seconds. Reconnect the power cable, and try powering on your sound bar.

Press and hold the (power) and - (volume down) buttons on the Soundbar for more than five seconds. Unplug the AC power cord. Plug the AC power cord back in, and press the (power) button to turn on the unit.

To start with the reset process, hold down the power and the volume buttons for 5 seconds. Make sure you then unplug the power cord from your soundbar. Wait a few seconds then plug the power cord back in.

You can disable DEMO mode by simultaneously pressing the INPUT and Power buttons on the unit for five seconds. Notes: You can also disable DEMO mode by simultaneously pressing the Power and VOL + buttons on the unit for five seconds. If you perform this method, it is recommend doing so with the sound off.

Depending on your model, there is a PARTY LIGHT button on the unit or the remote control. Pressing that button will disable the Demo Party Light. If applicable to your unit, setting the clock on your stereo system will also disable the DEMO mode.

Why does my sound bar not work sometimes? ›

Most soundbar issues result from improper connection, an incorrect device setting, a poor physical arrangement. Most fixes are fairly simple, though some may require some time to troubleshoot. Try the simplest solutions first, and move up in complexity only if needed.

Soundbars: 6-16 years

A newer amplified soundbar, like a Sonos Arc, should not become obsolete anytime soon, though expect the hardware to operate for up to 7 years before needing a repair or a replacement.

Please check the internal audio settings in your cable or satellite box to increase the volume. If this does not resolve the issue or you are not using a cable or satellite box you may want to try turning off the SRS TruSurround and the SRS TruVolume settings inside the Audio Settings.

Information. Most average home receivers have low fidelity speakers which accentuate the upper mid-ranges and highs. The human voice tends to be in the mid-audio range. The rest of the sound spectrum that helps keep these two components separate and distinct is lost.

Turn ON your Vizio Soundbar by hitting the power button. Locate the Bluetooth and Volume Down buttons. Press these buttons and hold them simultaneously for approximately five seconds. Wait for all the lights on the soundbar to flash thrice before you let go.

Restore Your Data

To recover data after factory reset Android, navigate to the "Backup and Restore" section under "Settings." Now, look for the "Restore" option, and choose the backup file you created before resetting your Android phone. Select the file and restore all of your data.

A reset can reboot your product or it can clear locally-stored product settings, such as paired device lists.

To soft reset your Vizio sound bar, just unplug it from the wall, hold the Power button for 30 seconds, and plug it back in. To restore your Vizio soundbar to its original factory settings, press and hold the Bluetooth and Volume Down buttons for 5 seconds.

If your wireless speaker does not have a RESET button

Press and hold the (power) button for about 10 seconds to reset (restart) the speaker.

How do I get sound only to come out of my soundbar? ›

When an Optical Cable is connecting the TV and the Soundbar, simply change the Audio Settings to emit the sound via the Optical Output. This means that the sound will come from the Soundbar only, regardless of the TV volume level.

To make a soundbar louder, you'll need to check the external volume settings and adjust them accordingly. If your soundbar doesn't project audio the way you want it to, you'll have to ensure there are more channels setup, and you may need to tweak the acoustics in your room.

Demo mode for the status bar allows you to force the status bar into a fixed state, useful for taking screenshots with a consistent status bar state, or testing different status icon permutations. Demo mode is available in recent versions of Android.

Exit retail demo mode

In order to exit retail mode, retail employees must ensure that the demo device isn't enrolled under device management and factory reset the device from the boot loader.

Monitor overheating

One reason the monitor could shut off is because it's overheating. When a monitor overheats, it shuts off to prevent damage to the circuitry inside. Causes of overheating include dust build-up, excessive heat or humidity, or blockage of the vents that allow the heat to escape.

Reset the sound bar to the factory default settings. To perform a Factory Reset, Press and Hold the Bluetooth( ) and Volume Down (—) buttons for 5 seconds.

If you're having issues with your Vizio sound bar cutting out, try plugging other devices into your receiver. If the problem persists, it may be due to a faulty HDMI cable or port. Check your cables and ports for any damage and replace them if necessary. You may also need to reset your sound bar.

Sound Distortion

This is usually the easiest and most obvious sign that a speaker is blown. What is this? It is easily identifiable as a fuzz or hiss coming from the speaker, especially in louder volumes. All you need to do is turn up the volume and listen for any uncharacteristic sounds to diagnose this.

You'll get the best sound quality via an HDMI cable. Most soundbars and TVs have an HDMI port. Keep in mind you need to use an HDMI ARC or eARC cable and port. If you don't have this, you'll need an optical cable in addition to an HDMI cable.

Will VIZIO replace my soundbar? ›

VIZIO's Responsibilities

If VIZIO determines that a product is covered by this warranty, VIZIO will (at its option) repair or replace it, or refund the purchase price to you. There will be no charge for parts or labor during the warranty period.

Just like any other speaker, you can damage your soundbar if you leave it on all the time. It can get overheated, pose a fire hazard, and unnecessarily use up energy. While it may seem convenient and harmless to keep your soundbar on all the time, you can shorten the lifetime of your investment, amongst other things.

A Your TV speakers should be turned all the way down or off when you use a separate sound system such as a soundbar. Using them with the soundbar may cause echoes and the TV speakers do nothing to improve the sound. Look at your TV's audio menu. If you can, turn the TV speakers off completely at the menu.

A: DTS TruVolume™ is a revolutionary solution that provides a consistent and comfortable volume level for a more enjoyable multimedia experience. Simply set the volume once.

Why is the music so loud in relation to the voices on my TV? Many home TVs have relatively low fidelity speakers which accentuate upper mid-range and high frequencies, while the human voice tends to be in the mid-audio range.

This can be due to several reasons. First and foremost, it could be due to hearing loss. If your hearing sensitivity is down, it makes it difficult to distinguish the different sounds of speech. Consonant sounds tend to be more soft in volume and can often be washed out if a person has some high frequency hearing loss.

This is because films are created with a reference level for most sounds, but allow for dynamic swings of up to 20 decibels louder. If you adjust the volume down for these swings, it's hard to hear the regular sounds.

Raising the center channel volume relative to the left/right and surround channels makes dialogue louder than the music and sound effects, so it's easier to understand what the actors are saying. The easiest way to make the adjustment is with your receiver or home theater-in-a-box system's remote control.

It's also a great way to enhance your listening experience when listening to podcasts or audiobooks, especially when you want to cast that content wirelessly. Some soundbars make dialogue clearer and easier to understand, while others can make voices sound more muddy and cluttered.

What is the best equalizer setting for TV? ›

What are the best TV equalizer settings for dialogue? Well, the clarity of a voice is found in the mid-frequencies – say from 2 kHz to 6 kHz. This should help to amplify the dialogue and make it cut through better.

Turn ON your Vizio Soundbar by hitting the power button. Locate the Bluetooth and Volume Down buttons. Press these buttons and hold them simultaneously for approximately five seconds. Wait for all the lights on the soundbar to flash thrice before you let go.

Turn off the soundbar and unplug it from the power outlet. Press and hold the “Reset” button on the back of the soundbar for at least 10 seconds. This button is usually located near the power cord. While continuing to hold the “Reset” button, plug the soundbar back into the power outlet.

Reset the sound bar to the factory default settings. To perform a Factory Reset, Press and Hold the Bluetooth( ) and Volume Down (—) buttons for 5 seconds.

Reset the soundbar by powering it off and then pressing and holding the Play/Pause button until it displays 'INIT OK'. Power on the soundbar, and then try pairing the soundbar to your TV again.

SmartCast TV's may also be able to be reset by pressing and holding the input and volume down button on the side of the TV. After 10-15 seconds a banner will pop up saying to press and hold the input button to reset the TV to factory defaults.

Most soundbar issues result from improper connection, an incorrect device setting, a poor physical arrangement. Most fixes are fairly simple, though some may require some time to troubleshoot. Try the simplest solutions first, and move up in complexity only if needed.

Soundbars: 6-16 years

A newer amplified soundbar, like a Sonos Arc, should not become obsolete anytime soon, though expect the hardware to operate for up to 7 years before needing a repair or a replacement.

How do I use my phone as a soundbar remote? ›

To control your Soundbar with an iPhone, download the SmartThings app, then use the 'Source' button on the Soundbar itself or its remote to choose Bluetooth or WiFi. Both options will work. Add your device to the SmartThings app, and you're ready to go!