How to Reset a Soundbar - 2022 [Samsung, Vizio, LG, Bose] (2023)

How to Reset Samsung Soundbar – [...

Looking for ways to reset the soundbar device? Problems in the soundbar might be irritating to most users and might affect the performance of the whole product. The best solution to the problem is factory resetting the system. It is a time-efficient solution and can be performed at home.

Performing a reset will resolve the problem from its roots and relieve the consumers from unwanted future troubles, which might not be achieved by a simple troubleshoot or reboot. However, the method to reset the soundbar varies among brands and is usually simple. This article deals with various methods to reset the soundbars of different brands.

How to Reset a Soundbar

Resetting a soundbar is not difficult and generally can be done at home without any expert supervision. However, the process differs from device to device among similar brands or different brands. Moreover, some devices also require a remote control to perform the task, hence providing enhanced convenience to the consumers.

However, sometimes even the factory reset might not be able to fix the issue, and consumers might need to seek expert guidance. Nevertheless, it is not a bad idea to try and resolve the problem at home before contacting a skilled technician. Some methods to reset soundbars of various famous brands are as follows.

(Video) How to reset a Bose soundbar (700, 500, 900 & 300)

Resetting the Samsung Soundbar

Resetting a Samsung soundbar is relatively easy and can be achieved by following the steps mentioned below.

  • First and foremost, locate the power button on the control panel and press it until “INIT OK” is displayed on the soundbar.
  • Make sure that the soundbar is turned off before proceeding with the above-mentioned step. Afterward, turn on the device and pair it with the soundbar.
  • Identify if the problem has been resolved. If not, seek expert guidance in this regard.

Resetting the Philips Soundbar

In order to reset the Philips soundbar apart from the device, remote control is also required to perform the task efficiently. Follow these steps to complete the task.

  • Firstly, press the bass up, volume down, and treble up button, located on the remote control, simultaneously.
  • This step should be performed within 3 seconds in the strict order, as mentioned above.
  • Next, identify if the soundbar has turned off and on after you have performed step 1.
  • Now, you will observe that most of the settings have been changed to default.
  • Lastly, connect the soundbar back to the television by following the Philip user manual available with the product.

Resetting the Bose Soundbar

Contrary to its market counterparts, the Bose soundbar requires a very complicated procedure to reset the system, which might be difficult for some users.

  • The first step involves the removal of the voice assistant integrated into the soundbar if any. If no voice assistant is embedded in the system, directly move towards powering off the soundbar as mentioned in step 4.
  • In order to eliminate the assistant, access the voice assistant application, and remove the device from the list of attached gadgets.
  • Afterward, open the Bose app and remove the voice assistant account in the setting menu.

Once the voice assistant has been removed, users can proceed towards the factory reset.

  • Initially, power off the soundbar and then press the power and forward skip button for 5 seconds simultaneously.
  • Next, the release of amber light on the display panel will indicate the successful completion of the reset.
  • If the light does not glow, it is advised to contact a technician for guidance.

Resetting the Yamaha Soundbar

Yamaha soundbar can be reset in two different ways; one is using the control panel located on the soundbar, while the other involves the use of remote control. Steps are similar in both methods and are discussed below.

(Video) How To Reset Vizio Sound Bar - It works for all models

  • Similar to most devices, the first step focuses on turning off the device.
  • After powering off the soundbar, press and hold the power and volume up button.
  • Keep holding until the lights located on the display screen start flashing.
  • Keep in mind that light will not flash if the gadget is compatible with Amazon Alexa.
  • Last but not least, power on the device and reconnect with the television.

If the problem persists, contact the Yamaha customer support service or an expert in this regard.

Resetting the Vizio Soundbar

Steps for factory resetting for Vizio sound bar are as follows;

  • Open the control panel and locate the Bluetooth button.
  • Now, locate the volume down button and press both the buttons together, and release them after holding for five seconds.
  • Mostly, both buttons are present consecutively and are not difficult to identify.
  • Similar to the Yamaha soundbar, once the factory reset has been performed successfully, the display lights will flash three times.
  • However, the lights and their working mechanism varies among different Vizio soundbars.
  • Lastly, connect the soundbar back to the television.

Resetting the Sony Soundbar

The method of resetting a Sony soundbar varies from model to model, but most steps are similar in all devices. For resetting a Sony soundbar, follow these steps,

  • Press and hold the volume and power button simultaneously and release after 5 seconds.
  • Make sure to unplug the power cord from the soundbar.
  • Replug the soundbar after several seconds.
  • Check if the system has been restored to its default settings.
  • Try connecting it with the television. If the problem is not resolved, contact the customer support service.

Performing a reset always deletes the device data and resets its functionality back to default mode. In addition to this, in most cases, it also leads to disconnection of the wireless devices paired with the soundbar, and consumers might need to reconnect them. However, whether this will occur or not is highly dependent on the type of Sony soundbar used by the consumer.

Resetting the LG Soundbar

Following steps need to be performed while factory resetting an LG soundbar.

(Video) Vizio Sound Bar How To Reset - Vizio Sound Bar Factory Reset Guide, Instructions, Tutorial

  • First and foremost, locate the sound effect button along with the volume down button on the remote control and control panel of your soundbar, respectively.
  • Press both buttons together and hold them until the reset screen appears on the display screen/menu.
  • Reset the soundbar based on instructions and try reconnecting it with a television device.
  • Check if the problem has been resolved.

Frequently Asked Questions

How do I reset my soundbar?

To reset a soundbar, press and hold the power and volume button for at least five seconds before releasing them. Afterward, unplug the power cord from the device and reconnect it after several seconds. Check if the issue has been resolved, and try connecting the soundbar with your television.

Why is my soundbar not working?

There might be several reasons for a soundbar to stop working properly. Most common among them include the off ARC feature, problems in device settings such as issues with television output setting, etc. It is essential to troubleshoot the soundbar in order to identify the potential reasons for its malfunctioning.

How do I reconnect my Samsung soundbar?

Follow these steps to reconnect the Samsung soundbar to your television. Firstly, pair both devices by using the television remote control. Navigate to sources and select the connection guide option. Select the device for pairing and follow the instructions to connect the devices. Once paired, go to settings and select Bluetooth audio device in the sound output option. Select your soundbar, and you are done.

How do I update my Samsung soundbar?

Use a smart thing app to update the soundbar firmware. Open the app and select the soundbar. Once you have gained access to the control panel, navigate to information, and move towards the firmware update option. Select it and scroll down to the update now option. Click it, and the rest will be done by the gadget.

Why does my soundbar volume go up and down?

There are many reasons for problems in the soundbar volume. This might be due to the conflict between the device and television advance audio settings. The problem can be solved by turning off the SRS TruVolume feature in the television audio settings.

Wrapping Up

Soundbars are performance-oriented and remarkable technological devices popular among the majority of consumers. But, these gadgets also malfunction sometimes and might require a factory reset to solve the issue. Mostly, troubleshooting and rebooting are preferred over a factory reset.

This is because the latter leads to the deletion of all the existing data on the system and changes the device back to its default setting. However, the method guarantees a complete eradication of most software related issues of the gadget. Performing a reset is simple and, therefore, can be performed at home without any expert guidance.

(Video) How to connect Bose Smart Soundbar 300 with smart TV


How do I reset my Vizio sound bar to factory settings? ›

Performing a factory reset on your VIZIO soundbar completely erases any custom settings and/or preferences to their original factory settings.
  1. Press and hold the Bluetooth and Volume Down buttons simultaneously for five seconds.
  2. All 12 LEDs will flash three times.
  3. The factory reset is complete.

How do I do a hard reset on my Samsung soundbar? ›

Reset the soundbar by powering it off and then pressing and holding the Play/Pause button until it displays 'INIT OK'.

How do I get my soundbar to work again? ›

Can't hear TV sound from the soundbar, home theater system, or home audio system
  1. Perform a power reset or restart of the TV. ...
  2. Turn off your audio system and the TV, disconnect the cables between your TV and the audio system, and reconnect them. ...
  3. Verify that the audio output setting of your TV is set to the audio device.
Nov 24, 2022

Where is the reset button on Vizio sound bar? ›

Unfortunately, no reset button is found on the control panel of Vizio sound bars. You can initiate reset by locating the Bluetooth and Volume Down buttons and simultaneously press for approximately five seconds. Once it is successful, all the LED lights on the soundbar will blink three times.

How do I reset my LG soundbar? ›

Locate the input and Bluetooth button on your LG soundbar. Press and hold them simultaneously for ten seconds. Once released, you should successfully reset your LG soundbar to its previous settings or default settings.

How do I reset my soundbar without a remote? ›

Turn off the soundbar and unplug it from the power outlet. Press and hold the “Reset” button on the back of the soundbar for at least 10 seconds. This button is usually located near the power cord. While continuing to hold the “Reset” button, plug the soundbar back into the power outlet.

How do I reset my LG sound bar and subwoofer? ›

Press and hold PAIRING on the back of the wireless subwoofer for more than 5 seconds, until the led on the subwoofer blinks red and green alternating. Unplug the power cord of the soundbar and the wireless subwoofer. Connect them again after the LED of the main unit and the wireless subwoofer are fully turned off.

How do I reboot my Bose? ›

Simultaneously press and hold the AUX and Volume – buttons for 15 seconds until a tone is heard.

How do I reset my Bose speaker to factory settings? ›

Restore the factory settings of your speaker.

Press and hold the Power button for 10 seconds until the speaker powers off and the lights on it turn off.

Why is my Bose soundbar not working? ›

Turn off the Bose system, the source device and the TV. Unplug the Bose system, the source device and the TV. Disconnect two HDMI cables at both ends and reseat them ensuring secure connections. Reconnect the source device, the TV and the Bose system to power.

How do I reset my sound completely? ›

  1. Check your audio and sound source. ...
  2. Go to sound settings. ...
  3. Check external speakers. ...
  4. Turn to a Windows troubleshooter. ...
  5. Go to sound settings to run troubleshooter in another way. ...
  6. In the sound settings screen, check the Volume mixer. ...
  7. Click the Reset button. ...
  8. Check the sound control panel.
Dec 26, 2022

How do I resync my Samsung soundbar? ›

If the Soundbar is connected to a digital TV and the video appears out of sync with the audio, press the SOUND CONTROL button to sync the audio with the video. Use the [Skip Forward or Skip Backward,] buttons to set the audio delay between 0 ms and 300 ms.

How do I reset my Vizio sound bar remote? ›

To perform a Factory Reset, Press and Hold the Bluetooth( ) and Volume Down (—) buttons for 5 seconds. Note: This will erase all settings and preferences that you have set. Enable/disable the use of a VIZIO TV remote control to power on and adjust the volume of the sound bar.

Why is my Vizio sound bar not working with my Samsung TV? ›

If there is no sound coming from the soundbar, you'll need to change another setting on your Samsung TV. Go to TV Settings > Sound Settings > Expert Settings. From here, change the HDMI/Digital Audio Output Settings to 'PCM'. This should fix the issue.

Why has my Samsung sound bar stopped working? ›

Cables that aren't seated well or in the wrong connections could prevent your soundbar from working correctly. Disconnect all the cables and then reconnect them to see if this might fix your issue. Also, be sure to disconnect your power cable.

Why is my Samsung soundbar connected but no sound? ›

When there is no sound from the soundbar, make sure the connected devices are turned on, the soundbar is set to the correct source, and the cable is connected properly.

Why is my VIZIO sound bar not working? ›

Unplug the power cord from the Sound Bar. Once unplugged, hold down the power button on the Sound Bar for 5 seconds. Reconnect the power cable, and try powering on your sound bar.

Why does my VIZIO soundbar have no sound? ›

Power cycle TV and Soundbar off and on. Hard reset and reconnect the Soundbar (Bluetooth + Volume Down). Lessen the amount of Bluetooth traffic by turning off extra Bluetooth devices. Check physical connections and make sure they're in all the way.

How do I reset my VIZIO 2.0 sound bar? ›

Reset the sound bar to the factory default settings. To perform a Factory Reset, Press and Hold the Bluetooth( ) and Volume Down (—) buttons for 5 seconds.

Why is my LG sound bar not working? ›

LG Soundbar Not Connecting: Connection Issues

Unplug the power, wait 10 seconds, and replug in both the TV and Soundbar. Turn both devices on and wait for a minute. If they don't connect, go to your TV menu and look for Sound. Find Pair devices or make sure the Sound is set Out to the correct device.

What is the F button on LG sound bar remote? ›

F (Function): Selects the function and the input source. LG Sound Sync (Wireless) LG TV HDMI IN HDMI Portable PORT. INFO: - Displays the input source information.

How do I start my Bose soundbar without the remote? ›

Auto-wake lets you turn on your product without a remote control. For example, your Bose product can power on automatically when you turn on your TV or cable box.

Can you control Samsung soundbar without remote? ›

To control the Soundbar with your smart device and the Samsung Audio Remote app, download the Samsung Audio Remote app from Google Play Store. You can select different input sources, select songs, and control some functions through the Audio Remote App.

How do I put my Samsung soundbar in pairing mode without remote? ›

If you don't have the remote, press the Source button on the top panel and then select BT. After a few seconds, the panel will display BT READY if there is no Bluetooth device already connected to the soundbar. When BT READY appears, press and hold the Source button for more than 5 seconds until BT PAIRING displays.

How do I reset my Bose subwoofer? ›

Try resetting the bass module by disconnecting power for 30 seconds. Disconnect the power cord from the back of the bass module or from the power outlet. Wait 30 seconds, then reconnect power and try again.

How do I reset my Samsung subwoofer soundbar? ›

Use a small pointed object to press the ID SET button on the back of the subwoofer. Continue holding until STANDBY turns off and LINK (Blue LED) blinks quickly.

How do I reset my soundbar subwoofer? ›

Reset the power on the subwoofer and try again.

Unplug the power cord for the subwoofer, and then plug it back in. Wait for it to reconnect to the soundbar, and then play music or video content and listen for sound drop outs.

Why is my Bose speaker not responding? ›

Try the putting the speaker into recovery mode.

If the speaker has become unresponsive during or after an update, the speaker can be put in to a recovery mode to resolve the issue.

How do I fix my Bose speaker not working? ›

Product will not turn on
  1. Try both the buttons on the product and the controls in the Bose Music app. ...
  2. Check the power connections at your product and at the power source. ...
  3. Be sure the power cord is connected to a working power outlet. ...
  4. Reset your product. ...
  5. Your product may need service.

How do I reset my Bose for free? ›

Reset your earbuds.
  1. Place your earbuds in the charging case.
  2. Connect charging case to a power outlet with a USB cable and charger. ...
  3. After 5 seconds, disconnect the USB cable from the charging case, then wait 1 minute.
  4. Remove your earbuds from the case and resume normal use.

How do I put my Bose speaker in setup mode? ›

If a Bose app or instructions ask you to put your system in Setup mode:
  1. On the top of your speaker, simultaneously touch and hold the AUX and Play/Pause buttons.
  2. Wait until a 5 seconds countdown starts and completes on the display: The light bar on the front of the system blinks white twice, then then glows amber.

How do I manually pair my Bose speaker? ›

To enter pairing mode:
  1. In the Bose Music app, tap the Source button. Tip: If the a different product is shown, tap the My Bose icon in upper-left, select the desired product, then tap the Source button.
  2. Select Bluetooth.
  3. Tap Add New to make your speaker available to connect to a Bluetooth device.

Why is Bose speaker not connecting? ›

Reboot the device being used to connect to the Bose system.

This is typically done by turning off the device and, if possible, removing the battery for 15 seconds. Then, turn on the device and try again.

Why is my soundbar on but no sound? ›

If you're using an analog connection, make sure the TV volume is turned up. If the TV's analog audio output is set to “variable” and you're getting no sound from the soundbar, try turning the TV's volume up. If the TV is turned down all the way, you'll hear no sound even if the soundbar is set to full volume.

Why my Bose speaker is connected but no sound? ›

Reboot the Bluetooth® device.

Electronics might need to be reset on occasion to correct minor issues. This is typically done by shutting down the device, then powering it on again.

How do I reset my Samsung sound System? ›

It can fix minor glitches and enables you to program your settings from scratch.
  1. 1 Press the Home button on your remote control.
  2. 2 Using the directional pad on your remote, navigate to and select Settings.
  3. 3 Navigate to and select Sound > Expert Settings.
  4. 4 Navigate to and select Reset Sound.
Mar 31, 2022

How do I reset my Samsung sound mode? ›

  1. 1 From Smart Hub panel, Select Settings.
  2. 2 Select Sound.
  3. 3 Select Expert Settings.
  4. 4 Select Reset Sound.
  5. 5 Select Reset to reset all sound settings.
Oct 14, 2022

Why is my audio output not working? ›

Reboot your computer. Verify via the speaker icon in the taskbar that the audio is not muted and is turned up. Ensure that the computer isn't muted via hardware, such as a dedicated mute button on you laptop or keyboard. Test by playing a song.

Why is my Vizio sound bar out of sync with my TV? ›

Change the audio format on your TV

In your TV's audio settings, see if you can change the audio format to PCM instead of Dolby Digital, bitstream, or passthrough. I've found this fixed the audio delay on all my TVs.

Why is my LG sound bar out of sync with my TV? ›

LG TVs with webOS

Push the Home button on your remote. Select the Settings gear icon in the top-right corner. Select Sound > AV Sync Adjustment. Turn On AV Sync Adjustment, then use the left-right slider to delay or speed up the audio to match the video better.

How do I get my TV to recognize my soundbar? ›

To set up HDMI ARC, power on your TV and soundbar.
  1. Next, connect one end of an HDMI cable into the HDMI IN (ARC) port on your TV.
  2. Connect the other end into the HDMI OUT (TV-ARC) port on your soundbar.
  3. Next, change the source on your soundbar to the D.IN.

How do I get my VIZIO soundbar to work with my remote? ›

How to Control a Soundbar With a TV Remote
  1. Find the optical or HDMI ARC connection on both the soundbar and TV.
  2. Connect an optical or HDMI cable to each.
  3. Turn the TV and soundbar on.
  4. Test and Troubleshoot Any Connection Issues.
  5. Adjust and Optimize Your Sound.
May 3, 2022

How do I reset VIZIO to default settings? ›

This is the same as the first time you turned on the TV. Press the MENU button on the remote. Highlight System then Reset & Admin then Clear Memory. Use the Arrow buttons on the remote to highlight CLEAR MEMORY/FACTORY DEFAULTS or Reset TV to Factory Defaults and press the OK button.

What to do if VIZIO sound bar is not working? ›

No audio or Intermittent Audio from VIZIO Sound Bar
  1. Make sure your sound bar is powering on. ...
  2. Verify the sound bar is connected to an 'Audio Out' port on the back of the TV. ...
  3. Make sure the Sound Bar is set to the correct input. ...
  4. If you're still having trouble, try a 'factory reset' on the sound bar.

How do I put my VIZIO soundbar in setup mode? ›

First, press the 'Menu' button on your Vizio soundbar remote. You'll be able to use the arrows on your remote to navigate the menu until you find the 'WiFi Setup' option. To select it, press the play button. At this point, your Vizio soundbar should enter WiFi or Pairing mode.

What happens if I reset my VIZIO TV to factory settings? ›

Resetting a VIZIO Smart TV to its factory defaults will remove all customized settings, such as app, network, picture and audio settings, etc. The SmartCast platform with apps is found on VIZIO 4K UHD Smart TVs released between 2016 – 2017 and all VIZIO Smart TVs released since 2018.

How do I factory reset my VIZIO TV without a remote? ›

Take these actions:
  1. Press the power button on the back of the TV to turn it on.
  2. Press and hold the “Input” and “Volume Down” buttons at the same time for 10 to 15 seconds while the TV is on.
  3. If you want to reset the TV, you will receive a popup. ...
  4. All of your data will be erased, and your Vizio TV will restart.
Nov 7, 2022

Why has my sound bar suddenly stopped working? ›

Most soundbar issues result from improper connection, an incorrect device setting, a poor physical arrangement. Most fixes are fairly simple, though some may require some time to troubleshoot. Try the simplest solutions first, and move up in complexity only if needed.

Why did my Samsung sound bar stopped working? ›

The factors that cause your Samsung soundbar to stop working could include faulty connections, settings issues, or hardware malfunctions.

What input should my Vizio soundbar be on? ›


Connect one end of the HDMI cable to the HDMI 1 (ARC) port on the back of your TV. 2. Connect the other end to the HDMI OUT (ARC) port on your VIZIO Sound Bar.

How do I reset my LG wireless soundbar? ›

Locate the input and Bluetooth button on your LG soundbar. Press and hold them simultaneously for ten seconds. Once released, you should successfully reset your LG soundbar to its previous settings or default settings.


1. How to fix an out of sync Soundbar
(Samsung Australia)
2. How to fix soundbar delay
(Bhupinder Tube)
3. Bose Soundbar Universal Remote – Pairing to Your System
(Bose Product Support)
4. How to set up Bose smart soundbar 900 to smart TV | Complete Bose 900 soundbar Setup Tutorial
5. Bose CineMate Universal Remote - Programing and Using
(Bose Product Support)
6. Bose TV Speaker – Unboxing + Setup
(Bose Product Support)
Top Articles
Latest Posts
Article information

Author: Edwin Metz

Last Updated: 02/26/2023

Views: 5816

Rating: 4.8 / 5 (78 voted)

Reviews: 93% of readers found this page helpful

Author information

Name: Edwin Metz

Birthday: 1997-04-16

Address: 51593 Leanne Light, Kuphalmouth, DE 50012-5183

Phone: +639107620957

Job: Corporate Banking Technician

Hobby: Reading, scrapbook, role-playing games, Fishing, Fishing, Scuba diving, Beekeeping

Introduction: My name is Edwin Metz, I am a fair, energetic, helpful, brave, outstanding, nice, helpful person who loves writing and wants to share my knowledge and understanding with you.