How To Adjust Vizio Sound Bar Without A Remote (A Guide) (2023)

So, you’ve just got a sweet Vizio sound bar to go with your new TV, but you want to do a few tweaks here and there. Unfortunately, you don’t have the remote and don’t want to spend some more bucks on a replacement.

It’s happened to all of us: You lose your remote, or it simply dies and isn’t working. The question then remains how to adjust Vizio sound bar without a remote.

A Vizio sound bar is a high-quality device that allows you to enjoy your favorite entertainment. This can be played from mobile devices and computers, but sometimes it’s difficult if you want to adjust the sound bar without using the remote control.

Luckily, adjusting your Vizio sound bar is possible without the remote. In this article, we’ll show you how to do it.

What is a Vizio Sound Bar?

Vizio sound bars are small speakers that can be placed below your TV or mounted on the wall. They connect over WiFi and send audio through an HDMI cable, so you can use them as part of a home theater system.

A Vizio sound bar can really improve the sound quality of your television. Not only do they provide richer, fuller sound, but they’re also a great way to reduce TV noise and clutter.

How to Adjust the Volume on a Vizio Sound Bar Without a Remote

There are a few ways to adjust the volume on your Vizio sound bar without using the remote. One way is to use the buttons on the sound bar itself. If you’re facing the sound bar, the volume buttons are on the right-hand side.

These easy steps will show you how to adjust the volume on your Vizio Sound Bar without the remote.

1. Connect the soundbar to a power outlet and power on the TV and sound bar.

2. Press and hold down the “Source” button on your Vizio sound bar for 5 seconds until it blinks.

3. Select “Sound Mode” in the menu by pressing the source button again, then select “Advanced” in that same menu and press OK or Enter to change the settings.

4. Scroll down through all of the sub-menu options until you find “Sound Mode” in the bottom left corner of your screen. Click on it once and press OK again to select it.

This will bring up a series of sub-options that allow you to change how your audio sounds through this particular speaker system (bass, treble, etc.).

Select the sound mode you want by clicking an option in this menu (e.g., “Movies”) and press OK again to save changes, and return to the main menu with new setting selected for the current mode (e.g., Movies).

5. Also, turn down the volume as low as possible without making any noise or distortion (if this is too loud, turn it back up). You may have to do this several times before getting it right because your TV’s volume level controls may still be set differently than those on your sound bar or receiver.

How to Change the Settings on a Vizio Sound Bar Without a Remote

Don’t worry if you misplaced your Vizio sound bar remote—you can still make adjustments to the settings without it. Here’s how:

Here’s how to change the Vizio sound bar settings without a remote.

1. Press and hold the “Menu” button for two seconds until you see the menu options flash on your TV screen.

2. Select “System” then “Sound,” and select one of the following:

Adjust SRS TRU Surround Sound settings:

This option is used to adjust the volume of your TV, including surround sound effects, such as voice enhancement, dialog enhancement, and ambient sound enhancement. You adjust the settings according to your preference.

Factory default settings:

This option restores the factory settings for all devices connected to it. This includes input names (such as HDMI) and other settings a previous user may have modified.

Another way you can adjust other settings without using your remote control is by:

Step 1#

Press and hold down the Menu button for about three seconds until it begins to flash green.

Step 2#

Use the arrow buttons to select “Settings” from the menu that appears on your TV screen.

Step 3#

Use the arrow buttons to select “System” from this menu, and then use the arrow buttons again to select “Advanced.”

Step 4#

Use the arrow buttons again to select “Sound Options.” This will bring up a new screen where you can adjust various sound options such as adjusting audio delay or changing surround sound modes.

How to Reset a Vizio Sound Bar Without a Remote

Vizio sound bars are pretty easy to reset if the power goes out or you want to start over. But what if you lose your remote? You’ll need to reset the Vizio sound bar without the remote.

Step 1#

Turn off your sound bar and unplug it from its power source (usually a wall outlet).

Step 2#

Press and hold down the input button on the front of your sound bar for about five seconds. This will select menu mode, where you can select different settings.

Step 3#

Select “Settings” by pressing down on the volume up button for about five seconds. The menu option should now be “Settings.” Select this option by pressing down on the volume up button again until you see “Settings” at the bottom of your screen.

Step 4#

Scroll down until you see “Reset” under “Sound Settings.” Press down on this button for about five seconds to select it. This action should take you back to “Settings,” where you can now choose another setting if desired.

Additionally, depending on the model, there are several ways of resetting the sound bar without a remote.

• Press and hold the power button on the sound bar for at least five seconds.
• Once you see “RESET” in blue on the display, release the power button.

Vizio Sound Bars Reset Button

The Vizio sound bar has a reset button on the back of the unit. To reset your Vizio sound bar, you will need to know where this button is located. The reset button is located at the bottom of your Vizio sound bar and marked with a red circle.

Long press the reset button for 5 seconds until the light flashes. Release the button when you see the flashing light. Your Vizio will now be factory reset and ready for use again.

How to Turn on a Vizio Sound Bar Without a Remote

If you’ve misplaced your Vizio sound bar remote or don’t have it on hand, there’s no need to worry. You can still turn on your sound bar without it!

To do this, simply press and hold the power button on the sound bar for about five seconds. The power light will start flashing, which means the sound bar is turned on. You can then use the volume buttons on the sound bar to adjust the volume to your liking.

How to Adjust the Bass on a Vizio Sound Bar Without a Remote

If you cannot find your Vizio sound bar remote, don’t worry—you can still adjust the bass on your sound bar without it! Just follow these simple steps:

• Turn on your sound bar by pressing the power button on the front or back.
• Use the dial on the front or back of the sound bar to adjust the volume.
• Use the arrow buttons on the front or back of the sound bar to select Bass.
• Use the up and down arrows to adjust the bass level. The most important options are “Low,” “Mid,” and “High”.
• Press the OK button to save your settings.
• Repeat this process for all three settings (lows, mids, highs) until you reach your desired sound quality.

Conclusion

Sitting down to watch your favorite movie or show and realizing that you can’t because your Vizio sound bar remote is missing can be a total pain. But don’t worry, you can still adjust the sound bar without it, as we have guided you on how to adjust Vizio sound bar without a remote.

If you have any issues with any of the abovementioned problems, the simple steps we have given will help you sort them. Follow the guide closely, and you will enjoy your Vizio sound without spending a penny more. All the best.